6 Body-Equipment, Exterior 911 Targa · Section 10 Rear Center Section – Glass Roof Panel Rea

6 Body-Equipment, Exterior 911 Targa Section 10 Rear Center Section – Glass Roof Panel Rear Center 6_03_02 The glass (1) for the folding rear window is bonded to the frame (3) using adhesive (2) around the periphery. The rear trim surround (4) with sealing lip (5) consists of a shaped plastic bead. The tape (6) around the periphery assumes the sealing functions between the roof module (7) and the rear center section (8). The weatherstrip (9) installed on the edge of the roof module forms a seal to the folding rear window. A plastic film (10) is bonded to the body in the area where the folding rear window rests. The electric motors (11) for the glass roof panel drive are installed on the mounting frame for the guide tubes. The rear compartment trim panel (13) is pushed under the weatherseal. 6-22 Service Training 2002