996 Carrera Group 4 Running Gear / PAGE 251
45 58 19 Removing and ins;talling transverse acceleration sensor · Removal Note
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera 4 (996) Anti-lock Brake System (ABS)
45 58 19 Removing and ins;talling transverse acceleration sensor
Removal Note
1. Movethe front seatsinto the rear seat If the carpet is laid over the transverse
position. acceleration sensor, cut out the carpet in
this area.
2. Unclip the left and right side-panellining
in front of the centre console.
4. Extendtransverse acceleration sensor and
pull off plug with the ignition switched off.3. Remove nuts from the transverse acceleration
Do not pull the cable when doing this. sensor No.1. Removeshield No.2 and
transverse acceleration sensor No.3.
Installation
1. Install in reverse order,
2. After installation,the transverseacceleration
sensormustbe checkedwith the Porsche ,;
SystemTester2 (Serv.No. 45 5801).
306_99
337_99
4558 19 Removing and installinlg transverse acceleration sensor 45-117
Printed in Germany -28. 1999 C4_45109
This is a source reference. Confirm exact model applicability in the original material.