996 Carrera Group 4 Running Gear / PAGE 253
Anti-Lock Brake System (ABS) 911 Carrera 4 (996) · 4. Raisevehicle on the left at the jacking points Sensor funct
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Anti-Lock Brake System (ABS) 911 Carrera 4 (996)
4. Raisevehicle on the left at the jacking points Sensor function
until approx. 100 mm ground clearance is To check the vehicle, raise it once on the left
present at the left wheels. and once on the right, approx. 100 mm each
Read off and note or store the value of the time.
sensor in the PST 2 display.
An exactly defined change from the transverse
Note accelerationvalue must take place.
Observethe safety regulationswhen raising the The output value is used as a reference value
vehicle. for vehicles placed on a level surface.
5. Lower vehicle on the left again. Nominal display
Then raise vehicle on the right in the same Raisingthe vehicle on the left must result in a
manner until approx. 100 mm ground positive value while raising it on the right must
clearance is present at the right wheels. result in a negative value, both with respect to
Read off and note or store the value of the the output value.
sensor in the PST 2 display. Nominalvalue: 0.55 m/s2 or greater.
6. Carry out evaluationaccording to the following Example:
text. Eliminatefaults present if necessary. Outputvalue = 0.00 m/s2
raised approx. 100 mmNominal value:
on the left = 0.58 m/s2
Raised on left approx. 100 mm = raised approx. 100 mm
0.55 m/s2 or greater on the right = -0.58 m/s2
Raised on right approx. 100 mm = If no change is detected by comparison with
-0.55 m/s2 or greater the output value when raising the vehicle (right
or left raised to the same level),then the sensor
is faulty.
After fault elimination, read out the fault memory
with the Porsche System Tester 2 and erase the
fault memory if necessary. 8
18
45 -120 45 58 01 Checking transverse acceleration sensor
C4_45109 Printed in Germany -28, 1999
This is a source reference. Confirm exact model applicability in the original material.
