Fault, DTC Possible causes, elimination, notes · 3. Check wiring from the control module connector pins 3

911 Carrera (996) Tiptronic diagnosis Fault, DTC Possible causes, elimination, notes 3. Check wiring from the control module connector pins 30, 32 and 33 to the 16-poletransmissionconnector pins 8, 4 and 9 for continuity, short to ground and short to B+. 4. Check SV. To do this, remove the ATFpan, disconnect plug connectionfrom the SV and measure the resistance. Nominalvalue:24 36 .0. Test point 6 Shiftlock PIN lock Faulteffect: Open circuiVshort to Faultis only entered in the fault memory. ground, short to B+ Note OTC 63 Whenthe ignition is on, a transmission range can be selected from the selector lever position P or N only if the foot brake is pressed in addition. Check lifting solenoid with wiring. To do this, connect an ohmmeter to control module connector pins 2 and 53 and measurethe resistance. Nominalvalue: 60 ...90 .Q 2. Check wire from control module connector pin 2 to the lifting solenoid connector pin 5 for continuity,short to ground and short to B+. Note The lifting solenoid connector is accessible only if the centre console is removed. 37 01 DiagnosisjTroubleshooting, Tiptronic 37 -D 23 Printed in Germany -8, 1998 99637D21