Fault, DTC Possible causes, elimination, notes · Test point 16

Fault, DTC Possible causes, elimination, notes Test point 16 Gear sel. monitor, Faulteffect: transmission input speed Reduceddriving program. Signal implausible DTC 92 Note The ratio of transmission input speed/transmissionoutput speed is monitored. 1. Check sensor for the transmission input speed on Tiptronic control module connector pins 16 and 44 with an ohmmeter Display:230 300 .0. 2. Check wiring from control module pin 16 (or 44) to the 16-pole transmissionconnector pin 5 (or 6) for open circuit, short to ground and short to B+. 3. Check shield on control module connector pin 23, 4. Check sensor on transmission socket pins 5 and 6 with an ohmmeter, Display: 230 ...300 Q Note The hydrauliccontrol unit must be removed before the sensor can be tested. 5. If items 1 ...4 are OK and no other faults are stored, there is a mechanical/hydraulicfault in the transmission (e.g. ATF level not OK, slipping clutches or brakes). 37 01 DiagnosisjTroubleshooting, Tiptronic 37 -D 33 Printed in Germany -8, 1998 99637D21