Test Work instruction IResult Possible causes of fault · TO3 Test: open circuit in signal circ

Test Work instruction IResult Possible causes of fault TO3 Test: open circuit in signal circuit than 12 V -Open circuit between: .Ignition on PSMcontrol module .PSM switch On actuated wiring harnessplug (wiring harness side) .Measure voltage betweenthe terminal 5 following terminals: and PSM control module PSM switch wiring harness plug (wiring harness wiring harnessplug (wiring harness side) side)terminal 86 terminal 2 and or ground -PSM switch faulty Note: The plug connection X 1/3 (terminal 9) is located in the wiring harness.Checkthe wiring harness for Yes: 104 ~g or chafio,g:damage. T04 Test: voltage short in signal circuit Less than No: 0.3 V -Short circuit to voltage between: .Measure voltage betweenthe PSMcontrol module following terminals: wiring harnessplug (wiring harness side) PSM control module terminal 44 wiring harnessplug (wiring harness and side)terminal 44 PSMswitch and wiring harnessplug (wiring harness side) ground terminal 1 Note: The plug connection X 1/3 (terminal 10) is located in the wiring harness.Check the wiring harnessfor Yes: 105 pinchingor chafing damage. 45 -D 179 I'GreaterINo:!