Test Work instruction Result Possible causes of fault · TO5 T~st:.Short to ground in signal

Test Work instruction Result Possible causes of fault TO5 T~st:.Short to ground in signal Greater No: Circuit than 500 -Short circuit to ground between: kOhm PSM control module .Ignition off wiring harnessplug (wiring harness side) .Measure resistance betweenthe terminal 44 following terminals: and PSM control module wiring harness PSM switch plug (wiring harness side)terminal 44 wiring harnessplug (wiring harness side) and terminal 1 ground Note: The plug connection X 1/3 (terminal 10) is located in the wiring harness. Check the wiring harnessfor Yes: T06 ~~oLchafing damage. T06 open circuit in signal circuit Greater No: than 12 V -Open circuit between: Ignitionon PSMcontrol module .PSM switch Off actuated wiring harnessplug (wiring harness side) .Measure voltage betweenthe terminal 44 following terminals: and PSM control module PSM switch wining harnessplug (wiring harness wiring harnessplug (wiring harness side) side)terminal44 terminal 1 and or grG>und PSM switch faulty Note: The plug connection X 1/3 (terminal 10) is located in the wiring harness.Check the wiring harnessfor IYes:EOl pinchingor chafing damage. IEOI 1-P§M control modulefaulty I 45 -D 180IIITest:,i.