Fault, Fault code Possible causes, elimination, notes · 5. Clear the fault memory

Fault, Fault code Possible causes, elimination, notes 5. Clear the fault memory 6. Checkwhetherthe faultappearsagain. a) If the fault does not appear again, replace the contact unit. b) If the fault appears again, check the wiring harnessfor pinches and chafing damage. c) If no fault is found on the wiring harness,replace the triggering unit. Note Signal not plausible. This fault path is checked only during the triggering unit self-test,i.e. up- dating of the fault during the cyclical tests does not take place. If the fault memory is erased, the ignition must be switched off, the igni- tion key removed and the ignition switched on again in order to check the fault path. Only in this way is another self-test carried out. Test point 2 1. Disconnectthe plugconnectionto the passenger'sairbagunit. Firing circuit, passenger Fault codes 10, 11, 2. Attachthe specialtool 9516 in conjunctionwith specialtool 9566. 26,27,39 130-96 69 -D 14 6901 Diagnosis/troubleshooting, airbag Printed in Germany, 1997