fullymatted.
Back to search
996 Carrera Group 0 Part 2 Diagnosis / PAGE 41

Fault, Fault code Possible causes, elimination, notes · 3. Clear the fault memory.

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 41
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Airbag diagnosis Fault, Fault code Possible causes, elimination, notes 3. Clear the fault memory. 4. Checkwhetherthe faultappearsagain. a) If the fault does not appear again, replace the passenger's airbag unit. b) If the fault appears again, check the wiring harnessfor pinches and chafing damage. c) If no fault is found on the wiring harness, replace the triggering unit. Note Signal not plausible. This fault path is checked only during the self-test of the triggering unit, i.e. updating of the fault during the cyclical tests does not take place. If the fault memory is cleared, the ignition must be switched off, the igni- tion key removed and the ignition switched on again in order to check the fault path. Only in this way is another self-test carried out. Test point 3 Supplyvoltage 1. Inspectthe battery and generator. Fault code 03 2. Inspectthe plug connectionon the triggering unit for corrosion. Test point 4 Warning light, airbag 1. Inspectthe fuse for the supply voltage (terminal 15) for the instru- Fault codes 01, 02 ment cluster. 2. Inspectthe bulb and replace it if necessary. 3. Inspectthe line from the triggering unit pin 7 to the warning light for continuityand short circuit to positive or negative. 69 01 Diagnosis/troubleshooting, airbag 69 -D 15 Printed in Germany, 1997 99669Dl.

This is a source reference. Confirm exact model applicability in the original material.