996 Carrera Group 0 Part 2 Diagnosis / PAGE 156
Test point 9 · Motor of footwell / Diagnosis conditions
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Heating diagnosis
Test point 9
Motor of footwell / Diagnosis conditions
defrost valve No control module fault stored.
No fault with supply voltage (5 volts).
Signal implausible
Fault code 28 Signal implausible
1. Check footwell / defrost valve for smooth operation.
2. Unplug connectorsA, 8, C and D from the heatingjair-conditioning
control.
3. Unplugconnector from footwell / defrost valve drive motor.
4. Connectohmmeterto connector C 8 and drive motor
connector pin 1.
Display: < 5 ,Q
Connectohmmeter to connector B 10 and drive motor connector pin 2.
Display: < 5 .Q
Connectohmmeter to connector A 12 and drive motor connector pin 3,
Display: < 5 .0.
Connectohmmeter to connector D 11 and drive motor connector pin 4
Display: < 5 .0.
Connectohmmeter to connector D 3 and drive motor connector pin 5
Display: < 5 .Q
." 5. Check wire from connector C 8 to drive motor pin 1 for short to B+
and short to ground.
6. Check wire from connector B 10 to drive motor pin 2 for short to B+
and short to ground.
7. Check wire from connector A 12 to drive motor pin 3 for short to B+
8. Check wire from connector 0 11 to drive motor pin 4 for short to B+
and short to ground.
8
80 01 Diagnosis/troubleshooting, heating 80 -D 25
Printed in Germany -II, 1998 99680Dl
-
This is a source reference. Confirm exact model applicability in the original material.
