fullymatted.
Back to search
996 Carrera Group 0 Part 2 Diagnosis / PAGE 179

Alarm system diagnosis 911 Carrera (996) · the deactivationperiod by the display type 3 Tilt sensor

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 179
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

Alarm system diagnosis 911 Carrera (996) the deactivationperiod by the display type 3 Tilt sensor at the alarm readiness display output and at The integrated tilt sensor is active analogously the display output "Door locked". An opening to the output Control of External Electronics. command deletes the switch-offcommand. During this time, a change in the vehicle tilt triggers an alarm. The current tilt of the vehicle If activation occurs by way of the emergency is stored as a reference value during a function (locking 3 times quickly), the output calibration phase defined for the tilt sensor. "External Electronics" is not switched on for this The system has an alarm siren with a activation cycle. This is acknowledgedby signal rechargeable battery supplywhich can 1 at the alarm horn and direction indicator light emit an alarm if the vehicle battery output, as well as by display type 2 at the alarm is removed. readiness displayoutput. A deactivation command deletes this command. Behaviour in the case of servicing If terminal 86 S, terminal 15 or a valid Whenremoving transponder key is recognised during the deactivation period, the alarm system is the vehicle battery deactivated (protection against unintentional activation). The central locking system is the alarm siren opened in this case. the alarm control centre A system self-test is carried out upon activation. The result of this test is acknowledgedvia an activated tilt sensor will trigger an alarm. the alarm readiness light and the display In order to carry out servicing work the alarm "Door locked" and can be called up from siren must be switched off before the work is the status memory via the diagnosisfunction. commenced.To switch it off, insert the vehicle Equipmentfaults are written into the fault key with valid transponder into the steering lock memory. Faults are indicated at the alarm and rotate to actuate the buzzer contact. horn and direction indicator light outputs Componentscan be removed with triggering by signal 2. the alarm as long as the vehicle key remains inserted. The alarm system is deactivated by a ground signal at the input "Deactivate" or by a deactivation signal from the handheld transmitter. If a valid transponder key is recognised,the alarm system is also deactivated.

This is a source reference. Confirm exact model applicability in the original material.