fullymatted.
Back to search
996 Carrera Group 0 Part 2 Diagnosis / PAGE 206

Fault, Fault code Possible causes, elimination, Notes · Test point 22

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 206
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) Alarm system diagnosis Fault, Fault code Possible causes, elimination, Notes Test point 22 Passenger compartment 1. Pull off plug I on the alarm control module. monitoring sensor 2. Pull off the plug at the passenger compartment monitoring sensor. Short to ground Fault code 22 3. Ohmmeteron alarm control module plug I pin 24 and ground. Display: 00.0. If display < 5 .0.,check wiring harnessfor chafing and pinching damage. Test point 23 W-iead See test point 21, point 5, (DME-immobilizer) Short to B+ Fault code 23 Test point 24 Control module faulty Replacecontrol module. Fault code 24 Test point 25 No terminal 86 S 1. Checkthe fuse F 5/1. recognised 2. Pulloff plug I on the alarmcontrolmodule. Fault code 25 3. Volbneter at plug I alarm control module pin 16 and ground. Insert the ignition key into the ignitionlock. Display: Battery voltage 4. Pull off the plug on the ignition lock. 5. Ohmmeter at ignition lock plug pin 86 S and plug I, alarm control module pin 16. Display: < 5 .Q 6. If no fault is detected, replace the electrical contact part of the ignition lock.

This is a source reference. Confirm exact model applicability in the original material.