Variant coding Note · Under the menu item Version coding there is a

Variant coding Note Under the menu item Version coding there is a The event memory must be cleared after thechoice of four functions. system test, since the test is saved in the event Variant 1 memory. The doors are automaticallylocked as soon as Passenger compartment monitorthe ignition is switched on. The function of the passenger compartmentVariant 2 monitoring sensor can be checked under menu The doors are automaticallylocked if the vehicle item Passengercompartment monitor. When exceeds a limit speed of 5 km/h. movementis detected in the passenger compartment,the alarm horn is activated briefly Variant 3 while the interior lighting and direction indicator The doors are automaticallylocked as soon as lights go on continuously. the ignition is switched on. If the doors are opened while the engine is running, automatic re-iocking takes place if the vehicle exceeds a limit speed of 5 km/h. Variant 4 The doors are not locked automatically. Note By actuating the central locking button or by pulling the door handle twice, doors which were locked automaticallycan be opened. System test All components of the alarm system (except for terminal 15) can be checked for operation under menu item System test. During the system test a bar runs across the screen, and if, for example,the oddments tray is opened, an alarm is triggered. This alarm output differs from the usual alarm output in that the alarm horn is activated only for a short time. The alarm output is accompanied by interior lighting and direction indicator lights. DiagnosisjTroubleshooting, Alarm system 132