Learning functions · Immobilizer Reading out remote controls

Learning functions Immobilizer Reading out remote controls The immobilizer code can be entered under Under the menu item Reading out remote menu item Learning functionsjimmobi/izerafter controls, the data of the remote controls can be the alarm control module is replaced. read out after the alarm system control module is replaced. If it is not possible to read out and Caution! transfer the remote controls (e.g. no communication with the control module), the old The immobilizer code cannot be remote controls can be adapted to the new deleted or changed again. An incorrect input will render the control module (teaching hand-held transmitter),& control module useless. Transferring remote controls > Input and check immobilizer code Under the menu item Transferringremote carefully. controls, the data read out from the remote controls can be transferred to the new control Transponder key module. A new remote control can be adapted for the vehicle under menu item Learning functions/transponder key. After the alarm system control module is replaced and the immobilizer code is entered, the old transponderscan be adapted to the new control module. Refer to Teachinghand-heldtransmitter on Page 90 -D 68 and Readingout and transferring remote control on Page 90 -D 71. Remote control Up to four remote controls can be adapted to the control module under menu item Learning functions/remote control. After the alarm system control module is replaced and the immobilizer code is entered, the old remote controls can be adapted to the new control module (refer to Readingout and transferring remote control on Page 90 -D 71 and Teaching hand-heldtransmitter on Page 90 -D 68). 9001