b) Teaching in the case of a lost or faulty 9. Press the double arrow key [«], select menu · hand-heldtransmitter:

911 Carrera (996) Alarm system diagnosis b) Teaching in the case of a lost or faulty 9. Press the double arrow key [«], select menu hand-heldtransmitter: item Remote control and press the double arrow key [»]. Caution! Risk of theft due to the lost 10. "Inputkey learning code" appears on the hand-held transmitter! screen. With the arrow keys [,,] or [v], input& the key learning code and press the double > It is essential to identify and arrow key [»]. delete the transponder code of the lost hand-heldtransmitter as 11. The following message appears on the described in step 8 b). screen: "Pleaseconfirm input'. Check the input and press the [F7] key to confirm the > It is essential to identify and delete the radio code of the lost input. hand-heldtransmitter as 12. Distinguishbetween loss and fault and described in step 12 b). additionalhand-heldtransmitter for the radio In this case, it is first necessary to identify code. and delete the stored transponder code of the lost hand-heldtransmitter. The remaining a) Teachingan additional hand-heldtransmitter: vehicle keys are required for this purpose. One after the other, insert the keys into the Select the same position (1 to 4) as for the transponder key and press the [F8] key. ignition lock, switch the ignition on and establish communicationwith the control b) Teachingin the case of a lost or faulty module. Current transponder showsthe hand-heldtransmitter: transponder code of the vehicle key that is presently inserted in the ignition lock. In this case, it is first necessaryto identify Compare this transponder code with the and delete the stored "radio code" of the lost transponder codes at positions 1 to 4. This hand-heldtransmitter. The remaining hand-held comparison allows the position of the lost transmitters are required for this purpose. hand-heldtransmitter (transponder code) to Press the locking button on the hand-held be identified, as one transponder code is transmitter and then insert the vehicle key into ultimately left over at positions 1 to 4. Insert the ignition lock, switch on the ignition and the vehicle key equipped with the new re-establishcommunicationwith the control hand-heldtransmitter into the ignition lock module. Current radio key shows the "radio and switch on the ignition. Establish code" of the vehicle key that is presently communicationbetween the PST2and the inserted in the ignition lock. control module. Select the identified position using the arrow keys [1\]and [v], then delete the transponder code with key [F3]. Then press the [F8] key. 9001 90 -D 69