fullymatted.
Back to search
996 Carrera Group 0 Part 2 Diagnosis / PAGE 235

Teaching hand-held transmitter 3. Select Alarm system in the menu and press · the double arrow key [»].

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 235
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

Teaching hand-held transmitter 3. Select Alarm system in the menu and press the double arrow key [»]. General 4. Select Learningfunction in the menu andUp to four hand-held transmitters can be press the double arrow key [»].adapted to the control module. The hand-held transmitter can be used to activate the central 5. Select menu item Transponderkey and presslocking and the convertible top (for 996 Cabrio, the double arrow key [»].country-specific version). Another function is the immobilizer by means of the integrated 6. The following message appears on thetransponder coil. screen: "Input key learning code". With the arrow keys [A] or [v], input the key learningWork preparation code and press the double arrow key [»]. The following information is required to teach the hand-heldtransmitter: 7. The following message appears on the screen: "Pleaseconfirm input". Check the input Key learning code from IPAS and press the [F7] key to confirm the input. 24 digit Code No. (see barcode label on key 8. Distinguishbetween loss and fault and grip) additionalhand-heldtransmitter for the transponder. If the key is stolen or the hand-held transmitter is faulty, all keys still in the a) Teachingan additionalhand-heldtransmitter customer's possession will be required. Withthe arrow key [v] select a free position Note: (1, 2, 3 or 4) and press the [F8] key. Now the transponder code is saved in the During maintenancework, please bear in mind selected position. Note the position of the that the transmission frequency of the hand-held new transponder code. transmitter is different according to the country of use. The corresponding reception frequency is printed on the alarm system control module. This reception frequency is either: 433 MHz with M-number M534 or 315 MHz with M-number M535 Procedure 1. Connectthe vehicle keys and the new hand-heldtransmitter and insert in the ignition. 2. Connect PST 2 and switch on ignition. 90 -D 68 9001

This is a source reference. Confirm exact model applicability in the original material.