996 Carrera Group 0 Part 2 Diagnosis / PAGE 310
ParkAssistent Diagnosis 911 Carrera (996) · Erase fault memory, move shift lever out of reverse gear and switch
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
ParkAssistent Diagnosis 911 Carrera (996)
Remedy:
Erase fault memory, move shift lever out of reverse gear and switch
off ignition. Next, switch ignition back on, move shift lever into reverse
and read out fault memory.
If the fault reappears,check the plug on the sensor for open
circuit.
If no open circuit can be detected, check sensor plug, pin 1 to pin 4
and pin 1 to pin 2, for continuity using an ohmmeter. There should be
no continuity.
If no short circuit can be detected, replace sensor,
Test point 5
Control module supply This fault is stored in the memory in the followingcases:
voltage >16.5 V 1. Lowvehiclevoltage.
or <9 V
Fault code 5 2. If thereis a faultin the generator.
Remedy:
Examinebattery and generator voltages.
Select Control module supply voltage and Sensor supply voltage
in the Actual values menu item, and check the valueswith the vehicle
in reverse gear and the engine running.
Displayedcontrol module supplyvoltage approx. 12 V
Displayedsensor supply voltage approx. 8V
Erase fault memory, move shift lever out of reverse gear and switch
off ignition. Next, switch ignition back on, move shift lever into reverse
and read out fault memory.
91 -D 52 9101 Diagnosis/troubleshootingParkAssistent(System POI)
This is a source reference. Confirm exact model applicability in the original material.
