Alarm system diagnosis 911 Carrera (996) · Teaching hand-held transmitter 3. Select Alarm system in

Alarm system diagnosis 911 Carrera (996) Teaching hand-held transmitter 3. Select Alarm system in the menu and press the double arrow key [»]. General 4. Select Learning function in the menu andUp to four hand-held transmitters can be press the double arrow key [»].adapted to the control module. The hand-held transmitter can be used to activate the central 5. Select menu item Transponder keyand press locking and the convertible top (for 996 Cabrio, the double arrow key [»].country-specific version). Another function is the immobilizer by means of the integrated 6. The following message appears on the transponder coil. screen: "Input key learning code". With the arrow keys [A] or [v], input the key learningWork preparation code and press the double arrow key [»]. The following information is required to teach the hand-held transmitter: 7. The following message appears on the screen: "Pleaseconfirm input". Check the input Key learning code from IPAS and press the [F7] key to confirm the input. 24 digit Code No. (see barcode label on key 8. Distinguishbetween loss and fault and grip) additionalhand-heldtransmitter for the transponder. If the key is stolen or the hand-held transmitter is faulty, all keys still in the a) Teachingan additional hand-heldtransmitter customer's possessionwill be required. With the arrow key [v] select a free position Note: (I, 2, 3 or 4) and press the [F8] key. Now the transponder code is saved in the During maintenancework, please bear in mind selected position. Note the position of the that the transmission frequency of the hand-held new transponder code. transmitter is different according to the country of use. The corresponding reception frequency is printed on the alarm system control module. This reception frequency is either: 433 MHz with M-number M534 or 315 MHz with M-number M535 Procedure 1. Connectthe vehicle keys and the new handileld transmitter and insert in the ignition. 2. Connect PST 2 and switch on ignition. 90 -D 54 9001 Diagnosis/troubleshooting, alarm system two-motor lock