b) Teaching in the case of a lost or faulty 9. Press the double arrow key [«], select menu · hand-heldtransmitter:

911 Carrera (996) Alarm system diagnosis b) Teaching in the case of a lost or faulty 9. Press the double arrow key [«], select menu hand-heldtransmitter: item Remote control and press the double arrow key [»]. Caution! Risk of theft due to the lost 10. "Input key learning code" appears on the hand-held transmitter!& screen. With the arrow keys [1\]or [v], input > It is essential to identify and the key learning code and press the double delete the transponder code of arrow key [»]. the lost hand-heldtransmitter as described in step 8 b). 11. The following message appears on the screen: "Please confirm input'. Check the > It is essential to identify and input and press the [F7] key to confirm the delete the radio code of the lost input. hand-held transmitter as described in step 12 b). 12. Distinguishbetween loss and fault and additionalhand-heldtransmitter for the radio In this case, it is first necessaryto identify code. and delete the stored transponder code of the lost hand-heldtransmitter. The remaining a) Teachingan additional hand-heldtransmitter vehicle keys are required for this purpose. One after the other, insert the keys into the Select the same position (1 to 4) as for the ignition lock, switch the ignition on and transponder key and press the [F8] key. establish communicationwith the control module. Current transponder showsthe b) Teachingin the case of a lost or faulty transponder code of the vehicle key that hand-heldtransmitter: is presently inserted in the ignition lock. Compare this transponder code with the In this case, it is first necessaryto identify transponder codes at positions 1 to 4. This and delete the stored "radio code" of the lost comparison allows the position of the lost hand-heldtransmitter. The remaining hand-held hand-heldtransmitter (transponder code) to transmitters are required for this purpose. be identified, as one transponder code is Press the locking button on the hand-held ultimately left over at positions 1 to 4. Insert transmitter and then insert the vehicle key into the vehicle key equipped with the new the ignition lock, switch on the ignition and hand-heldtransmitter into the ignition lock re-establishcommunicationwith the control and switch on the ignition. Establish module. Current radio key showsthe "radio communicationbetween the PST2and the code" of the vehicle key that is presently control module. Select the identified position inserted in the ignition lock. using the arrow keys [1\]and. [v], then delete the transponder code with key [F3]. Then press the [F8] key. 90 -D 55