996 Carrera Group 0 Part 2 Diagnosis / PAGE 378
HBA diagnosis 911 Carrera (996) · Test point 3
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
HBA diagnosis 911 Carrera (996)
Test point 3
Terminal15
Engine off
All loads switched off
PST2 display greater than 10 V
Note:
Communication with the control module is not possible without
terminal 15
Test point 4
Terminal 58
Engine off
Parking light off
PST2 display 0
Engine off
Parking light on
PST2 display
If 0 is displayed with the parking light on:
1. Checkfuse A5
2. Pullplug off the controlmodule
Switchparkinglighton
Measurevoltage betweenterminal 10 and ground
Voltmeter display greater than 10 v
If the signal (terminal 58) is present at the control module, replace the
control module. Check the wire if the signal (terminal 58) is not present
at the control module.
Note:
The headlightsare not raised when high beam is activated if there is an
open circuit at terminal 58 or if the control module is faulty.
94 -D 22 94 92 Diagnosis/troubleshooting HBA
This is a source reference. Confirm exact model applicability in the original material.
