fullymatted.
Back to search
996 Carrera Group 0 Part 2 Diagnosis / PAGE 379

Test point 5 · ABS speed

Add to repair workspace
Open repair workspace
Open full manual Original source
Original manual page 379
Read extracted page text

OCR can contain errors. Check the original page image for exact wording, warnings and specifications.

911 Carrera (996) HBA diagnosis Test point 5 ABS speed Engineoff Vehicle raised Ignition on Slowly rotate the rear left wheel by hand PST2 display greater than 1 km/h If 0 km/h is displayedwhen the wheel is rotated: 1. Checkfuse 89 2. Switch ignition off and pull off plug on the control module Switch ignition on Rotate the rear left wheel by hand and measure the voltage (AC range) betweenterminal 11 and ground Voltmeter display greater than 1 V If the wheel speed signal is present at the control module, replace the control module. If the wheel speed signal is not present at the control module,check the wire for open circuit or short to ground and check the ABS or PSM control module. 94 92 Diagnosis/troubleshooting HBA 94 -D 23

This is a source reference. Confirm exact model applicability in the original material.