27 60 19 Removing and installing starter · 1. Disconnectthe battery and cover the terminal 5. Pull back protective cap on

911 Carrera (996) Starter, power supply, cruise control 27 60 19 Removing and installing starter Removal 1. Disconnectthe battery and cover the terminal 5. Pull back protective cap on the starter cable or battery. Removethe complete air cleaner and undo cable terminal 30 (M8) and terminal assembly. 50 (M6) at the starter. 2. Disconnectthe line from the tank venting valve and the electrical plug connection. 1./( III Disconnectthe electrical plug connections at III the idle speed positioner and throttle potentiometer. 3. Disengage accelerator cable and remove throttle body. Pull off vacuum check valve. ~=:;/ 103 -97 6. Undo the upper fastening screw. To do this, use the following 3/8 inch tool: 3 long extensions,cross handle,universaljoint and hexagon socket wrench insert a/f 15. The joints can be secured using adhesivetape. 102 -97 7. Undo the lower fastening screw from the right generator mounting side. 4. Disconnectthe vent line for the oil separator 8. Carefullyremove the starter from the engine at the intake distributor. Undo all hose clamps compartmentto the rear. (4 ea.) at the intake distributor and push the rubber sleevesto the side. Pull out intake di- stributor to the rear. 2760 19 Removing and installing starter 27 -1 Printed in Germany, 1997 996271 ~