Starter, power supply, cruise control 911 Carrera (996) · Installation

Starter, power supply, cruise control 911 Carrera (996) Installation Tightening torques: 4. Engageaccelerator cable and install throttle body. Fit fastening screw M6 x 20 at the Terminal30 Nut M8 15 Nm (11 ftlb.) bottom right. Terminal50 Nut M6 6.5 Nm (5 ftlb.) Hexagon-headbolt MID 45 Nm (33 ftlb.) 5. Tighten the outer hose clamps of the rubber sleeve after securing the throttle body on the hydraulic pump housing. The throttle body 1. The angledcablelug of terminal50 (M6) must not contact the hydraulic pump housing. faces in drivingdirection(transmission)after assembly. 6. The intake system must be checked for leaks after assembly(visual inspection). 2. Carefullycentre the intake distributor. Push both rubber sleeves onto the intake distributor up to the marking (line)and secure (2 hose clamps). 104 -97 Arrow shows marking (line)on the intake distributor 3. Check bore in the rubber sleeves for check valve and vacuum to the fuel pressure regulator for clear passage. 27-2 27 60 19 Removing and installing starter 996271 Printed in Germany, 1997