996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 71
27 60 19 Removing and installing starter -GT3 · Removal Installation
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Starter, power supply, cruise control
27 60 19 Removing and installing starter -GT3
Removal Installation
1. Disconnectthe battery and cover terminal 1. Install and fasten starter. Fasten B+ lead
or battery. from the battery and B+ lead from the
engineto the B+ disconnection point to
2. Pull back protective cap on the solenoid Terminal 30 (M8 nut) on the solenoid switch.
switch and undo terminal 30 (M8 nut) and FastenTerminal 50 lead (M6 nut)to the
terminal 50 (M6 nut) at the starter. solenoid switch.
3. Undo the upper ;astening screw. To do this, Tightening torques:
use the 3/8 inch tool:
two short extensions,universaljoint, hexagon Terminal30 Nut M8 15 Nm
socket wrench insert a/t 15, cross handle or (11 ftlb.:
ratchet. Terminal50 Nut M6 6.5 Nm
(5 ftlb.)
4. Undothe lowerfasteningscrew. Hexagon-headbolt MID 46 Nm
(34 ftlb.:
5. Removethe starter from the holder and turn
so that the solenoid switch is facing in the
direction of the halfshaft. Removestarter 2. Push protective cap over the solenoid switch
in a downward direction. and engage in the B+ lead.
3. Connectthe batteryand performa function
test.
27 60 19 Removing and installing starter -GT3 27 -7
Printed in Germany -25, 1999 GT3277
This is a source reference. Confirm exact model applicability in the original material.