996 Carrera Group 2 Fuel, Exhaust, Engine Electronics / PAGE 70
Starter, power supply, cruise control 911 Carrera (996) · Adjusting cruise-control cable
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Starter, power supply, cruise control 911 Carrera (996)
Adjusting cruise-control cable
3 4
1- l) SJJ=~~=
291 -96 292 -96
Sequence1...4 Sequence5...7
1. Loosen snap ring 1 at adjusting piece 2
(displace it) and push threaded part 3 through
along with cruise-controlcable.
2. Engage cruise-control cable on cruise-control
actuator and clip on adjusting piece 4
(bayonetlock).
3. Unscrewthreaded part 5 until the accelerator
plate is noticeablypulled.
4. Draw accelerator plate firmly back against its
idle stop.
5. Push snap ring 6 back (fixing it),
6. Makefine adjustmentby turningthe threaded
part7.
Permissibleplay:0 + 1 mm.
27 -6 27 84 19 Removing and installing cruise-control actuator
996211 Printed in Germany, 1991
This is a source reference. Confirm exact model applicability in the original material.