Starter, power supply, cruise control 911 Carrera (996) · Removing and installing bracket for generator -GT3

Starter, power supply, cruise control 911 Carrera (996) Removing and installing bracket for generator -GT3 Installation: Install bracket for the generator, 3. Push on the coolant connecting hose between Replacethe four a-rings on the two connect- the oil/coolant heat exchangerand the ing sleeves betweenthe two coolant outlet bracket again and tighten the hose clamp. necks and the bracket for the generator. In- sert the bracket into the coolant outlet neck of cylinder bank 1- 3 from the right-handside. Then screw in the four fastening screws. Important: The front right screw must be inserted with Loctite 574 (as shown in the illustration), 418_99 4. Fit coolant outlet neck of cylinder bank 4 -6 Insert the neck with the connecting sleeve into the bracket for the generator for this purpose. Tightenthe two fastening screws on the coolant outlet neck 9.7 Nm (7.0 ftlb.) 420_99 2. Tighten the four fastening screws to 65 Nm (48 ftlb.). 27 -16 272719 Removing and installing bracket for generator -GT3 9962711 Printed in Germany -29, 1999