Disassembling and assembling clutch · No. Desi nation .Removal Installation

Disassembling and assembling clutch Note: No. Desi nation .Removal Installation 1 Releaselever 1 2 Releasebearing 1 Do not wash out bearing. Replace noisybearing. Do not grease sliding surface of release bearing or guide tube 3 Retainer spring 1 Grease ball journal at the contact point with the retaining spring using Optimol Longtime 3EP 4 Pan-headscrew M8 x 16 6 The bolts must alwaysbe The bolts must alwaysbe loosened in several steps tightened in several steps and crosswise in order to and crosswise in order to prevent deformation of prevent deformation of the thrust-platehousing the thrust-plate housing 5 Thrust plate 1 6 Drive plate 1 Centre with centring mandrel, special tool 9102 7 Pan-headscrew 8 Initial torque 25 Nm MIO x 1 x 50 (19 ftlb.) Final torque: 900 turn 8 Double-massflywheel 1 Ensurethe centring pins are seated firmly 9 Needle bush 30 -4 30 50 37 Disassembling and assembling clutch 996301 Printed in Gennany -13, 1998