7. There is an assembly bore in the guide rod 10. Undo fastening nuts from boost spring · for the clutch boost spring. In

911 Carrera (996) Clutch, actuation 7. There is an assembly bore in the guide rod 10. Undo fastening nuts from boost spring for the clutch boost spring. Insert a 3 mm 0' bracket (arrows). cotter pin in this bore, and bend over the Requirement: Boost spring secured ends (securing: refer to Figure478_98). with a cotter pin. Removeclutch pedal lever together 8. Removepin between the clutch push rod with boost spring and bracket. and clutch pedal lever. 9. Removeretainer (1) on the pedal bearing axle. n 8 x< 478_98 Installation 1. Inspect all bearing bushings X for clutch pedal lever and replace them if necessary. Lubricate sliding surfaces of the bearing bushingsX (Figure466_98) and the pedal bearing axle with Optimol,Optitemp LG 2, Part No. 000.043.203.37. 2. Assemble boost spring, bracket and clutch pedal lever. A -Clutch pedal lever 466_98 Description under step 2.1 or 2.2. B -Brake pedal 2.1 Carrera (996) Mod. '98/ some Mod. '99C -Steering outer tube X -Bearing bushings 2.2 Carrera (996) from current Mod. '99 -Retainer Note In the 911 Carrera (996), different boost springs may be fitted. Observe proper allocation when replacing the boost spring and/or the bracket. 30 05 19 Removing and installing the clutch pedal 30 -13 Printed in Germany -18, 1998 996309