Clutch, actuation 911 Carrera (996) · A modified (optimised)clutch pedal must also be 2.2 Carrera(996)from c

Clutch, actuation 911 Carrera (996) A modified (optimised)clutch pedal must also be 2.2 Carrera(996)from currentMod.'99 sometimes be using when replacing the boost spring. Identification/differentiation: Push rod closed / boost spring parts coated. Greasing of the boost spring bearing points The date of introductionfor this boost spring is is partly necessary and partly not permitted contained in the Parts Catalogue. (dependingupon the type of boost spring used). Engagethe hexagon bolt of the boost spring Informationcan be found in the Technical in the hexagonon the clutch pedal (arrow). Manual-Repair Group 3D, ServoNo. 30 Clutch boost spring: allocation and grease specification, Important: Do not grease, as the sliding surfaces of this type of boost spring are coated. 2.1 Carrera (996) Mod. '98/ some Mod. '99 This non-greasinginstructionappliesto all sliding surfaces (pin of boost spring, boost spring Identification/differentiation: bearing in bracket, bearing pin on boost Push rod of boost spring open on one side, spring and boost spring in the shell). boost spring parts not coated. Grease pin for boost spring (arrow) with mating bearing on the boost spring push rod, the boost spring bearing (arrows) and the bearing pins on the boost spring with Optimol, Optitemp LG 2, part No. 000.043.203.37. First remove old grease with solvent naphtha. \~ u Do not grease (not permitted) 467_98 Note Gold-colouredbracket (996.423.571.00) and boost spring with purple marking (996.423.081.09 Mod. '98/ some Mod. '99 or 996.423.081.11 from current Mod. '99) must Greasing necessary (arrows) 31_1_98 be used only in this combinationand installed only in the 911 Carrera (996). 30 -14 30 05 19 Removing and installing the clutch pedal 996309 Printed in Germany -18, 1998