No. Designation Qty. Removal Installation · 1 Hexagon-headbolt 10

911 Carrera (9961 Manual transmission -Actuation, ass. housing Note: No. Designation Qty. Removal Installation 1 Hexagon-headbolt 10 Tighten to 25 Nm (19 ftlb.) 2 Front transmissioncase 1 Seal with Loctite 574 cover 3 Hexagonnut (self-locking) 1 Fix the drive shaft with Always replace. special tool 9253 and shift Tighten to 300 Nm into a gear (222 ftlb.) 4 Hexagon nut (self-locking) Fix the drive shaft with Always replace. special tool 9253 and shift Tighten to 200 Nm into a gear (148 ftlb.) 5 Innerbearingrace 1 Pull off via fixed gearwheel Heat to approx. 120°C No.6 6 Fixed gearwheel(reverse 1 gear) 7 Spacer sleeve 8 Cylindrical-roller bearing 1 Pull off via loose gearwheel Heatto approx. 120°C No. 10 9 Thrust plate 1 10 Loose gearwheel(reverse 1 gear) 11 Synchronisingring 1 Mark for refitting Check for wear. Fit with the same gear wheel (nubsfacing the driver dogs) 12 Needle cage 1 Mark for refitting Fit with the same gear whee! 13 Hexagon-headbolt 2 Tightento 18 Nm (13 ftlb.) 14 Washer 2 15 Shiftcollar 1 Shift into a gear and Dotting marks centred remove together with shift with respect to the driver fork No. 19. Do not lose dogs. Stepped side faces the synchronisingcompo- loose gearwheelNo. 10 nents 16 Driver dog 3 Curved side faces the shift collar 17 Ball 3 34 35 37 Disassembling and assembling transmission -GT3 34- 211 Printed in Germany -29, 1999 GT334209