Manual transmission -Actuation, ass. housing 911 Carrera (996) · No. Designation Qty. Removal

Manual transmission -Actuation, ass. housing 911 Carrera (996) Note: No. Designation Qty. Removal Installation 18 Spring 3 19 Shift fork (reverse gear) 1 Fix shift rod with special tool 9650. Then adjust it so that just enough play remains at the shift collar when reverse gear is engaged. The synchroni- sing ring must be free to rotate in idle position Inner race *20 1 Mark for refitting. Pull off Fit with the same gear via guide sleeve No. 21 wheel. Heat to approx. 120°C 21 Guide sleeve (with snap ring) 1 Open side of the snap ring must not lie in the area of the driver dogs. Fit in correct position with shift collar and shift fork (snap ring facing loose gearwheelNo. 24) 22 Fixed gearwheel(5th gear) 1 Do not confuse with fixed gearwheelNo. 37. Large collar faces spacer sleeve No. 23 23 Spacer sleeve 24 Loose gearwheel(5th gear) 1 Do not confuse with loose gearwheelNo. 35 25 Synchronisingring 1 Mark for refitting Check for wear. Fit with the same gear wheel (nubsfacing the driver dogs) 26 Needle cage 1 Mark for refitting Fit with the same gear wheel Inner race * 1 Mark for refitting. Pull off Fit with the same gear27 via loose gearwheelNo. 35 wheel. Heatto approx. using arms of special tool 120°C 9284 34 -212 34 35 37 Disassembling and assembling transmission -GT3 GT334209 Printed in Germany -29, 1999