No. Designation Qty. Removal Installation · 1 Hexagon-headbolt 12

Note: No. Designation Qty. Removal Installation 1 Hexagon-headbolt 12 Tightento 25 Nm (19 ftlb.) 2 Gear housing 1 Roller of the shift catch must engage in the driver of selector shaft No.9. Seal with Loctite 574 3 Cylindrical-rollerbearing 1 Heatto approx. 120°C Shift rod (reverse gear)* 4 1 See Page 34 -221 5 Intermediatelocking element 1 Do not lose Insert with viscous grease 6 Shift rod (5th and 6th 1 See Page 34 -221 gears)* 7 Intermediate locking element 1 Same as No.5 Same as No.5 8 Locking element 1 Same as No.5 Same as No.5 9 Selector shaft 1 Do not lose rollers Fit rollers with viscous grease 10 Inner race Mark for refitting. Pull off Fit with the same gear via loose gearwheelNo. 14 wheel. Heatto approx. 120°C 11 Thrust plate 1 12 Cylindrical-rollerbearing 1 Heatto approx. 120°C 13 Thrust plate 1 14 Loose gearwheel (1st gear) 1 15 Friction ring 1 Mark for refitting Fit with the same gear wheel 16 Tapered ring 1 Mark for refitting Fit with the same gear wheel. Lugs must engage in the cut-outs on the loose gearwheel 34 -218 34 35 37 Disassembling and assembling transmission GT334217 Printed in Germany -29, 1999