No. Designation Qty. Removal Installation · 7 Synchronisingring 1 Mark for

Note: No. Designation Qty. Removal Installation 7 Synchronisingring 1 Mark for refitting Check for wear. Fit with the same gear wheel. Drivers must engage in the cut-outs on the coni- cal ring gearwheel.The nubs face the driver dogs 18 Needle bearing 1 Markfor refitting Fit with the same gear wheel 19 Inner race Shift rods in idle position. Fit with the same gear- Pull off via loose gearwheel wheel. Heatto approx. No. 30 Mark for refitting 120 °C 20 Shift rod/shift fork See Page 34 -221. (1st and 2nd gears)* Removewith shift collar No. 22 21 Locking element 1 Same as No.5 Sameas No.5 22 Shift collar (with asymmetri- 1 Insert in correct position cally pointed teeth) with guide sleeve and shift rod. The tooth gap inside the guide sleeve must be precisely aligned with the oil bore of the pinion shaft. 23 Driver dog 3 24 Ball 3 25 Spring 3 26 Guidesleeve 1 The tooth gap inside the guide sleeve must be pre- cisely aligned with the oil bore of the pinion shaft 34 35 37 Disassembling and assembling transmission 34 -219 Printed in Germany -29, 1999 GT334217 1