No. Designation Qty. Removal Installation · 1 Bearing outer race 1 Drive o

911 Carrera (996) Manual transmission -Actuation, ass. housing Note: No. Designation Qty. Removal Installation 1 Bearing outer race 1 Drive out from the inside Drive in with special with special tool P 264 b tool P 254 b and mand- rel of special tool P 254 12 Circlip 1 Fit in correct position and make sure it is seated properly 13 Selector lever 1 Use special tool 9649. Insert in correct position 14 Rubberwasher 1 15 Selectorlever 16 Shaft seal 1 Fill the space between the dust and sealing lips with grease (e.g. Liqui Moly). Drive in with special tool 9649/1 17 Bushing 2 Drive out with special tool Drive in with special 9684/2 tool 9684/1 18 Shift pinion 1 End clearance 0...0.15 mm. Adjust with washer (No. 19) 19 Adjustingshim x Mark for refitting Remeasureif necessary 20 Snap ring 1 Use special tool P 375 to push the snap ring and closure cap (No 21) down until the snap ring engagesin its groove. 21 Closure cap 22 Compressionspring 1 34 37 37 Disassembling and assembling transmission housing -GT3 34 -235 Printed in Germany -29, 1999 GT334231