Final drive -Differential, differential lock 911 Carrera (996) · 6. Use mastergauge 385/30 to set the measur-

Final drive -Differential, differential lock 911 Carrera (996) 6. Use mastergauge 385/30 to set the measur- 8. Fit side transmissioncover without O-ring ing mandrelto the setting dimension(in the and fasten it with four screws tightened in example:70.27 mm). Zero the dial gauge (3 mm diagonallyopposite sequence. measurementrange)with 1 mm preload. Note Do not use a hammer when fitting the side transmissioncover (the final dimensionplate is held by magnets and could fall off). Move the 385/30 cover to its installationposition only by uniformly tighteningthe screws. 9150 ..- ~~f14 9. Pull out the second centring screw with the spindle far enough so that the measuring mandrelcan still just be turned manually. ~ 9109 9109 \~~~~ 378_99 ~ 7. Place final dimensionplate 9281 on the drive pinion head and insert the measuringmandrel into the transmissionhousing.The dial gauge -\\ extension lies in the area of the final dimen- ~ sion plate. .;;;;-.;~~ 389_99 10. Carefullyturn the measuringmandrel until the dial gauge extension is at right anglesto the front face of the drive pinion head. It is at this point that the dial gauge pointer reaches its max. deflection (reversal point) and the dial gauge can be read off. Note 388_99 Maximumdeviation of the measuredvalue from the set installationdimension"E": ::t 0.04 mm. 39 -226 39 08 15 Adjusting drive set -GT3 GT339225 Printed in Germany -29, 1999 .--qp..~.-