Doorfront, central locking system 911 Carrera (996) · 7 -Fit door seal on outside

Doorfront, central locking system 911 Carrera (996) 7 -Fit door seal on outside ... -Position door seal on the outside at the top edge of the door and push it on. 1. Clip in the seal along the door contour. 2. Fastenthe door seal on the inner door panel with the clip -A-. , 8 -Fitting door brake ... 1. Position the seal. 2. Insert door brake from the inside and fasten it with the ,;.- '" -~ : collar nuts. Tightening torque: 10 Nm (7.5 ftlb.) 1. Screw Torx screw M8 -A- onto the A-pillar. A Tightening torque: 23 Nm (17 ftlb.) 9 -Fit power window unit 1. Insert power window unit into the door openingfrom below. 2. Fastenthe power window unit with the M6 collar nuts. Tightening torque: 10 Nm (7.5 ftlb.) See: Additional adjustment instructionsfor the power window. 1. Plug in the electrical plug connection. c:;;