10 -Fit door window · 1. Insertdoor windowinto the door channeland position it in

911 Carrera (996) Door front, central locking system 10 -Fit door window 1. Insertdoor windowinto the door channeland position it in -- the front and rear clamping pieces of the power window unit. rI //t .- .The bottom edge of the window must rest on the screw .~~ 1 / during adjustment' f~~:;; ,..z== .Observe additionalinstructions for adjusting the door win- ,=~~,,~3 dow! 1. Tighten the T 30 Torx screw. Tightening torque: 8.5:t 1.5 Nm (6.0:t 1.0 ftlb.) 11 -Fit door lock ... rn Note! .The actuating lever must be locked in basic position before J..I installation! .Observe additionalinstructions for adjusting the door lock! 'i' 1. Insert door lock with actuating motor unit into the door 'f .'" and fasten with the micro-encapsulatedT40 M8 x 14 T orx screw. Tightening torque: 20 +2 Nm (15.0 + 3.5 ftlb.) 1. Plug in the electrical plug connection. 12 -Fit connection piece 1. Clip in the electrical lead -8- on the base. 2. Insert door handleand position the bottom part of the ~ door handleon the door handlefrom inside. Tightenwith the collar nuts M 6. Tightening torque: 10 Nm (705 ftlbo) 1. Connectelectrical plug connection-A-. 575137 Disassembling and assemblil1g door 57-5 page 11 Printed in Germany-44,2001 c5751371 ~~,q",