Concludingthe mixing procedureand To concludethe mixing procedure,pull the mixer during its · engagingthe mixer in the piston

Concludingthe mixing procedureand To concludethe mixing procedure,pull the mixer during its engagingthe mixer in the piston last stroke so stronglytowards the rear against the piston that a rattling noise becomes audible.Then switch off the power drill and unscrewthe mixing rod from the mixer; the mixer then engages in the piston. 8 Insertingthe mixing cartridge in the bonding Unscrewthe screw cap on the mixing cartridge and screw gun and affixing the car windowwithin -15 on the processing nozzle (grey) -Hll-. Insert the mixing min- cartridge -H6- in the bonding gun -8-. Note: the bonding material has an open time of -15 min-, which means that the bonding material must be applied and the car window must be assembledwithin this period of time.