60 14 19 Removing and installing lifting/sliding roof drive · 1. Using a small screwdriverI carefully unclip

911 Carrera (996) Sliding roof 60 14 19 Removing and installing lifting/sliding roof drive Removal 1. Using a small screwdriverI carefully unclip both cover lenses at the openings provided. Undo fastening screws M5 with a crosshead screwdriver (arrow A). B 434_97 4. Push lifting/sliding roof drive in the roof / member trim to the side and take out to the bottom. Disconnectthe electrical ""' " plug connection. -~-c>~- Installation 176_97 1. Engageelectrical plug connection and carefully lay the wire (do not pinch), 2. Unclipcover at the rear left and right (arrow B),pushforwardtowardsthe windshieldand 2. Replacefastening screws(micro-encapsulated). remove. Tighteningtorque of the M5 x 25 fastening screws = 6 Nm (4.5 ftlb.) 3. Unscrewboth fasteningscrews(TorxT25) andtake lifting/slidingroof drivedown 3. Do not press on or touch the transmission/ and off the teeth. reception diodes with your fingers. 4. The cover lenses must not be soiled or smudged with grease. 60 14 19 Removing and installing lifting/sliding roof drive 60-9 Printed in Germany -17, 1998 996609 ~~I