996 Carrera Group 6 Body Equipment, Exterior / PAGE 30
Sliding roof 911 Carrera (996) · Installing inner panels
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Sliding roof 911 Carrera (996)
Installing inner panels
399_98
Positionthe sliding/tilting roof trim dimensionA
approx. 80 mm in front of the roof edge cut-out.
397_98
Press the sides of the inner panel into ~~ " ,... the sliding roof frame. Move to check /"
function. /'
/'
~ ~
rgJ ~
400_98
Engagethe left and right-handinner side panels
/'...: in the sliding/tilting roof trim.
Repeatthe procedure for installingthe sliding
roof panel.
398_98
Pull out the connector springs B on the gate
and push in sliding/tilting roof trim. Push
inner panels under the sheetmetal panel
of the sliding/tilting roof trim.
60 -8 60 40 19 Removing and installing sliding roof panel
996601 Printed in Germany -17, 1998
~-=~~~f'-
This is a source reference. Confirm exact model applicability in the original material.