No. Procedure Instructions · 8 Fasteningseal at the sides of t

911 Carrera (996) Convertible top, hardtop No. Procedure Instructions 8 Fasteningseal at the sides of the roof frame. The seal on the roof frame at the sides consists of two parts. Screw the upper seal to the roof frame together with a retaining rail using the TI5 x 9 Torx screws. Press the lower seal into the profile of the retainingrail. 9 Fasteningcable of the convertible-topcovering. Positionthe cable on the main bow, and fasten with the T25 x 12 Torx screw. Close and lock the convertibletop, 10 Fasteningconvertible-topcovering at the tension bow. As from the running gear number 99 XS 65 5 883, cutouts have been integrated to the right and left of the additionalseal. These cutouts can also be integrated retroactivelyinto the additionalseal by cutting out. Press tightening strip centre (notch marking) (inset A) into the lower groove of the tension bow (inset B) (centre of the tension bow is identified by a hole) (inset A). The reference overlap seams of the convertible-top covering must be positioned and centred in the additional seal (arrow C) cutouts on the left and right. Secure the convertible-topcovering by tapping in the seal (inset D). 61260014 61 28 55 Replacing convertible-top covering 61 -39 Printed in Germany -33, 1999 9966123