996 Carrera Group 6 Body Equipment, Exterior / PAGE 91
Repairing convertible top after emergency operation · Repairing convertible-top latch
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Convertible top, hardtop
Repairing convertible top after emergency operation
Repairing convertible-top latch
No. Procedure Instructions
1 Removelid from Insert Allen key (tool kit) into the openingson
convertible-toplatch the convertible-toplatch front edge, and press
the lid down and out.
2 Disengagelock With the Allen key, press the pawl up until it engages.
3 Move locking hook Insert the Allen key in the recess between the gear wheel
to end position and driving plate and move forward in the direction
of the arrow ("Open"-inscription on convertible-top
latch) until the locking hook is in the extended
end position (perceptible stop),
4 Detachconvertible-toplatch UndoT30 x 16 Torx screws.
Removeconvertible-toplatchand disconnectelectrical
plug connections.
5 Movelockinghook Insert the Allen key in the recess between the gear wheel
to end position and driving plate and move in the direction of the arrow
("Close"-inscription on convertible-toplatch) until
the locking hook is in the retracted end position
(perceptible stop),
6 Align gear wheel markings Leave Allen key inserted with the driving plate and gear
to one another whee! engaged.
Supply power to the electric motor via the 2-pole plug
using a separate power source, e.g. 9-volt block battery
or power supply unit.
Align gear wheel markings to one another using
the electric motor. Single dot on small gear wheel
must lie betweenthe two dots on the large gear wheel.
61 01 41 Convertible top repair after emergency operation 61 -47
Printed in Germany -11, 1998 9966145
This is a source reference. Confirm exact model applicability in the original material.
