996 Carrera Group 6 Body Equipment, Exterior / PAGE 92
No. Procedure Instructions · 7 Engage driving plate RemoveAllen key, turn the driving
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
No. Procedure Instructions
7 Engage driving plate RemoveAllen key, turn the driving plate manuallyand
engage it in the hole segment of the gear wheel.
8 Extend locking hook Using a separate power source, e.g. 9-volt block battery
or power supply unit, supply power to the electric motor
via the 2-pole plug until the locking hook is fully extended.
9 Installconvertible-toplatch Join electrical plug connection,position convertible-top
latch on roof frame I, fasten with the T30 x 16 Torx
screws and coat with high-strength screw locking
compound.
Tightening torque 7 Nm (5 ftlb.)
Press lid into the convertible-toplatch on the left and right.
61 -48 610141 Convertible top repair after emergency operation
9966145 Printed in Germany -11, 1998
This is a source reference. Confirm exact model applicability in the original material.