Removing and installing rear side section flap · No. Designation Qty. Removal Installation

Removing and installing rear side section flap Note: No. Designation Qty. Removal Installation 1 Hexagon-headbolt 8 Undo M6 x 20 2 Electrical plug connection 2 Disconnectelectrical plug Connectelectrical plug connection connection 3 Hardtopmountbracket,left 1 4 Hardtop mount bracket, right 5 Rear side section flap, left 1 At the flap, Figure A, Move flap into the pin, insert the Allen key in Figure 8, and adjust the emergency operation the height with respect mechanismand turn it to the rol~overprotection counterclockwise(direction system cover by means of arrow) until the lid of the slots, Figure D. of the flap starts to move A basic setting was made horizontally on the height adjusting nut, Figure D, at the factory. This setting should not be changed. Fastenflap in the frame with the hardtop bracket (Item 3) and the hexagon- head bolts (Item 1), and connect the electrical plug connection 61 42 19 Removing and installing rear side section flap 61 -55 Printed in Germany -7, 1998 9966153