Convertible top, hardtop 911 Carrera (996) · No. Designation Qty. Removal Ins

Convertible top, hardtop 911 Carrera (996) Note: No. Designation Qty. Removal Installation 6 Rear side section flap, left 1 At the flap, Figure A, Move flap into the pin, insert the Allen key in Figure B, and adjust the emergencyoperation the height with respect mechanismand turn it to the roll-over protection counterclockwise(direction system cover by means of arrow) until the lid of the slots, Figure D. of the flap starts to move A basic setting was made horizontally on the height adjusting nut, Figure D, at the factory. This setting should not be changed. Fastenflap in the frame with the hardtop bracket (Item 4) and the hexagon- head bolts (Item 1), and connect the electrical plug connection 7 Cover, left 1 Insert a plastic spatula Position it and press it under the cover and into the clips press it out 8 Cover, right 1 Insert a plastic spatula Position it and press it under the cover and into the clips press it out 9 Clip 8 Press on Inspect and replace if necessary 61 -56 61 42 19 Removing and installing rear side section flap 9966153 Printed in Germany -7, 1998