996 Carrera Group 6 Body Equipment, Exterior / PAGE 104
Convertible top, hardtop 911 Carrera (996) · No. Designation Qty. Removal
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Convertible top, hardtop 911 Carrera (996)
Note:
No. Designation Qty. Removal Installation
6 Convertible-top pin 2 Replace,
(left and right pins microencapsulated.
are identical parts) Tightening torque
12 :t 2 Nm
(9:t 1.5 ftlb.
7 Bracket with 2 Undo collar nuts (Item 2)
hydraulic pump and remove from roll-over
bar frame
8A Banjo bolt 1 Place a cloth underneath Fit the sealing rings
the banjo bolt and undo (Item 8), hydraulic lines A
the banjo bolt with red ring and the
sealing ring (Item 9) on
the banjo bolt (Item 7A),
and screw the banjo bolt
into the right side
of the hydraulicpump.
Tightening torque:
12 + 2 Nm
(9 + 1.5 ftlb.)
88 Banjobolt 1 Place a cloth underneath Fit the sealing rings
the banjo bolt and undo (Item 8), hydraulic lines B
the banjo bolt with blue ring and the
sealing ring (Item 9) on
the banjo bolt (Item 7B),
and screw the banjo bolt
into the left side
of the hydraulicpump.
Tightening torque:
12 + 2 Nm
(9 + 1.5 ftlb.)
9 Sealing ring A8 x 12, 4 Replace
1 thick
10 Sealing ring A8 x 12, 2 Replace
2 thick
11 Plug G 1/8" 1 Tightening torque
10 + 1 Nm
(7.S + 1 ftlb.)
12 Sealing ring 1 Replace
A lOx 14,1 thick
61 -62 618619 Removing and installing hydraulic cylinders
9966159 Printed in Germany. II, 1998
This is a source reference. Confirm exact model applicability in the original material.