Convertible top, hardtop 911 Carrera (996) · Replacing convertible-top frame

Convertible top, hardtop 911 Carrera (996) Replacing convertible-top frame No. Procedure Instructions 1 Fitting convertible-topsupports. 8 I 2111 Information: Ensure that the assembly aids are seated firmly. The assembly aids must be recalibrated if they were removed See: ServoNo. 61 01 15 -Adjusting convertibletop. Position convertibletop supports in the assembly aids and fasten with the M8 x 40 hexagon-headbolts and M8 nuts. Tightening torque 23 Nm (17 ftlb.). Insert rear side window inner seal together with the belt guide section, and tighten M6 hexagon nut on the convertible-topsupport. Push the deflection lever into the belt guide section, position the belt on the deflection lever and fasten with the M8 x 20 hexagon-headbolt. Tightening torque 50 Nm (37 ftlb.). Refer to Service No. 61 01 19 2 Fittingroof frame2. Press 10x12x15 bushing into the roof frame bore on the inside and outside. Position roof frame 2 on the convertible top support, connect with the 10D7x61,8 pin and secure with the retaining clip SLB 10, Removaltool, refer to Workshop EquipmentManual, Chapter 2.4, No, 131. 61 -106 61 30 55 Replacing convertible-top frame 9966199 Printed in Germany -33, 1999