996 Carrera Group 6 Body Equipment, Exterior / PAGE 145
No. Procedure Instructions · 3 Fitting roof frame 3.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Convertible top, hardtop
No. Procedure Instructions
3 Fitting roof frame 3.
Press 10x12x15 bushing into the roof frame bore on the
inside and outside,
Position roof frame 3 on the convertible top support,
connect with the 10D7x51,8 pin and secure with the
retaining clip SLB 10,
III-. Information:
Use assemblygrease when fitting the pins
4 Fittingroof frame1
Press 8x19x5.5 bushing in the bores of roof frame 2 or
roof frame 3 on the inside or outside.
Position roof frame 2 and roof frame 3 on roof frame 1,
connect with the 8D7x28.2 or 8D7x23.2 pin and secure
with the retaining clip SLB 8.
Removaltool, refer to Workshop EquipmentManual,
Chapter2.4, No. 131.
,
~-~
61300001
5 Fitting the main bow.
Position main bow and washer V9-100 on the
convertible-topsupport and fasten with the 6.4 washer and
M6.0 x 20 oval-headscrew. Secure oval-headscrew with
Loctite 270
Tightening torque 9 Nm (6.5 ftlb.)
61 30 55 Replacing convertible-top frame 61 -107
Printed in Germany. 33, 1999
9966199~~'"~-
This is a source reference. Confirm exact model applicability in the original material.