61 41 19 Removing and installing micro switch for rear side section flap · The upper and lower micro switches are replace-

911 Carrera (996) Convertible top, hardtop 61 41 19 Removing and installing micro switch for rear side section flap Removal Note The upper and lower micro switches are replace- ment parts. If one micro switch is defective, both must be replaced. Removingand installing rear side section flap: ServoNo. 61 42 19. 1. Remove rear side section flap, 2. Removeupper micro switch. Turn threaded spindle until the fastening screws can be undonewith an angle screwdriver (Torx TI0). 341_98 6. Unlock the secondary locking of the plug con- nection with a small screwdriver. Unlock both sides by inserting a small screwdriver and shift in the direction of the arrow. Figure shows secondary locking unlocked. 34O_98 3. Remove lower micro switch. 4. Turn threaded spindle until the fastening points can be heated with a soldering iron. 5. Heatfasteningpointsand removethe micro switch. 552_98 61 41 19 Removing and installing micro switch for rear side section flap 61-117 Printed in Germany -23, 1999 99661115