6102 Assembly instructions for hardtop assembly fixture · The following materials and tools are required to construct

911 Carrera (996) Convertible top, hardtop 6102 Assembly instructions for hardtop assembly fixture 37O_98 The following materials and tools are required to construct the fixture for work in the inner area: No. Designation Qty. SizejNo. Supplier A Set of fittings 1 Special tool 9620 Refer to Workshop Equipment Manual B Support cheek 2 Multiplex plate, 25 mm thick, 600 x 120 mm Commercially available C Swivel arm 1 Multiplex plate, 25 mm thick, 550 x 200 mm Commercially available D Base plate 1 Woockore pywood, 19 mm thick, 1500 x 900 rTm Commercially available E Boom 1 Hardwood, 30 mm thick, 650 x 50 mm Commercially available F Support 1 Hardwood, 50 mm thick, 90 x 140 x 190 mm Commercially available The following fixture is required for assembly work the outer area: G Wall support 1 See Workshop EquipmentManual for 911 Carrera Page 3.5 -71 (996) Tools: Drill, drill bit ~ 6 mm and drill bit ~ 3 mm, sabre saw, tape measure Set of fittings includes: Ai = Bracket (ix) A6 = 6 x 20 countersunkscrew (2x) A2 = Hinge (ix) A7 = 6 x 20 hexagonhead bolt with washer (4x) A3 = Support (2x) A8 = 6 x 60 countersunkscrew (2x) A4 = 6 M6 x 40 straight pin (6x) A9 = 6 x 50 countersunkscrew (3x) A5 = 4.5 x 20 countersunkscrew (8x) 61 02 Assembly instructions for hardtop assembly fixture 61 -123 Printed in Germany -17, 1998 99661123